Pioneer4you IPV V200 Box Mod by Yihi

$67.59
  • Ex Tax: $67.59
  • Product Code: M00001197
  • Availability: In Stock

Description The IPV Pioneer Mod is a high quality 200W box mod brought ..

Available Options

The IPV Pioneer Mod is a high quality 200W box mod brought to us by Yihi. It’s constructed from zinc alloy, anodized aluminum and ABS which provides an elegant and hard wearing design. Powered by the SX531 chipset, the IPV has a wattage range of between 5-200W and supports 2 x 18650 battery cells.

  • Water Resistance SX531 Chip
  • Powered by Dual 18650 Battery Cells (Required Separately)
  • Maximum 200W Output
  • Customisable Flavour Settings
    • Soft – Starts at a lower rate of 50% and slowly increases your power
    • Normal – Starts at your exact wattage settings
    • Power – Starts above your output settings and slowly brings them down
  • 0.96 TFT Display
  • Requires an External Battery Charger
  • 30mm 510 Connector
  • 5 Digit Puff Counter
  • Side Battery Magnetic Doors
  • Protection Modes
    • Low Battery Protection
    • Battery Over Charge Protection
    • Time Ignition Limit protection
    • Overheat Protection
    • Short Circuit Protection
    • Reverse Polarity Protection
  • Constructed from Zinc Alloy, Anodized Aluminum & ABS
  • Size: 90.6mm x 48mm
  • Resistance Range: 0.1-1Ω
  • Voltage: 6.4V-8.4V
  • Quiescent Current: <100uA
  • 1 x IPV V200 Box Mod
  • 1 x Type C USB Cable
  • 1 x User Instructions

You Must be 18 or Over to Purchase from This Website. Any Order Placed by Anyone Under the Age of 18 Will Be Cancelled & Refunded. Do Not Use if You Are Pregnant or Breastfeeding. Some Users Are Known to Be Allergic to Propylene Glycol (PG). Please Contact a Health Professional if You Experience Any Allergic Reactions. Keep All Products Out of Reach of Children and Pets. Follow All Warning Procedures On Individual Products.   

Write a review

Note: HTML is not translated!
    Bad           Good